RM3090E _51 Engine / Hybrid System _008397 2AR-FE FUEL _0056276 FUEL PUMP(w/ Canister Pump Module) A

2AR-FE FUEL  FUEL PUMP(w/ Canister Pump Module)  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>2AR-FE FUEL>FUEL SYSTEM(w/ Canister Pump Module)>PRECAUTION


HINT:

Perform "Inspection After Repairs" after replacing the fuel pump.

Click hereEngine / Hybrid System>2AR-FE ENGINE CONTROL>SFI SYSTEM(w/ Canister Pump Module)>INITIALIZATION


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repairs" after replacing the fuel pump.

Click hereEngine / Hybrid System>2AR-FE ENGINE CONTROL>SFI SYSTEM(w/ Canister Pump Module)>INITIALIZATION


a.
A197087C02
2.25,1.615 1.583,1.615 false 2.229,2.063 2.104,2.063 2.104,2.063 1.573,1.76 false 2.292,1.51 2.5,1.698 0.208,0.188 10 *2 2.302,1.979 2.51,2.156 0.208,0.177 10 *1
*1 Fuel Pump Spacer
*2 New O-Ring


Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.


b.

Connect the fuel pump connector.


c.

Attach the 5 claws to the holes to install the fuel pump.


Hide 77174 2.INSTALL NO. 1 FUEL SUCTION SUPPORT

a.

Attach the 2 claws to the holes to install the No. 1 fuel suction support.


Hide 77131C 3.INSTALL NO. 1 FUEL SUB-TANK

a.

Apply gasoline to a new O-ring and install it to the jet pump.


b.
A130453

Install the jet pump while aligning it with the installation position on the No. 1 fuel sub-tank.


c.

Install the jet pump nozzle.


d.

Attach the 2 claws to the holes to install the No. 1 fuel sub-tank.


e.

Connect the wire harness connector.


f.

Install the 2 springs to the fuel suction plate, and then install them to No. 1 fuel sub-tank.


g.

Install a new E-ring.

HINT:

Slightly lower the fuel suction plate to install the E-ring.